Baudisch.DoorController

Door intercom goes SIP

Existing door intercoms become modern SIP intercoms with the Baudisch.DoorController. Fast, simple and cost-efficient.

You are converting your phone system to an IP system and would like to keep the existing door intercoms?

Then you have found the optimal solution with the DoorController600-SIP!

Simply connect the existing voice and doorbell module, install an Ethernet-LAN connection and your VoIP calls are already taking place.

This device has exactly been developed to enable this task, allowing features which you can not implement with an ATA box:

• Automatic dialling to stored destinations
• Multiple re-dialling and call forwarding in case of a busy number
• 2 strong relay outputs are available to activate the door opener using a DTMF code and for remote control
• Identification of the intercom with a recorded voice message before the visitor is heard
• Automatic answer from the door intercom after positive identification of the caller

Data security

You are planning a new building and would not like to prepare for network cabelling to the outdoor intercom?

Baudisch Electronic has already thought of the LAN Secure Adapter several years ago and brought it on the market. With it, the network line to the IP door intercom is completely shut down in case of sabotage.

By the way, the DoorController600-SIP is also an alternative in cases where a LAN should not be installed.

The IP line ends in a secure area. The same applies to the release contact for the door opener.

Baudisch.DoorController600-SIP-PROFI

The product version PROFI should be used when the intercom is removed from the IP connection and the analog signals must be conducted over lines between 10 and 250 m in length.

The robust stainless steel housing for top hat rail mounting and the cable connection with push-fit screw terminals allow installation in a cabinet or a sub-distribution.

Baudisch.DoorController600-SIP-ECO

The open design in a support housing for top hat rail mounting is designed for application directly in the intercom. The ribbon cable connector of the door speaker module and the button module can be directly connected without wiring. An out-of-line operation is allowed by cable lengths up to 10 m. This way the connection is made using additional push-fit screw terminals.

Differences between ECO and PROFI

In addition to the above described various mounting and connection options, the following interfaces are not assembled by the cost-optimized ECO version:

• X2 for the connection of input modules and the switching output CAM_OUT for automatic identification of the associated camera.
• Relay output for control of a door light or display of a connection error.

DoorController600-SIP Plug‘n Play Kit

If desired, you receive the DoorController600-SIP completely operational with the door station module and SIP provider already configured by delivery.
You only need to mention the IP data of your internet gateway.

Included in the delivery of the kit 33-0952S:

• DoorController600-SIP-ECO
• Siedle TLM/LL 611-02 SM
• Siedle TM 612-04 SM
• Test account by Sipgate.de
• Documentation & Support